PREMIUM*** ACCU cut-off wheels

for steel and stainless steel


Description

The super-thin PREMIUM*** cut-off wheel has been specially designed for battery-powered angle grinders and enables smaller repairs to be carried out without requiring a power source. This therefore makes it considerably easier to use on scaffolding, in difficult-to-reach terrain or workplaces.These products have been optimised for battery-powered angle grinders and are ideal for cutting thin-walled metal sheets, profiles and pipes. They also make light work of machining small cross-sections, rods and reinforced steel.

Advantages

  • Work on smaller tasks in hard-to-reach areas without the need for a power source, while still benefiting from the usual TYROLIT quality
  • Tool can be used for a wide variety of applications on steel and stainless steel
  • Also makes light work of small cross-sections, rods and reinforced steel

PREMIUM*** DEEP CUT PROTECTION cut-off wheels

for steel and stainless steel


Description

Using newly developed technology and new materials we have succeeded in taking another step towards improved user safety. The PREMIUM*** cut-off wheel with DEEP Cut Protection enables the user to achieve maximum insertion depths into the workpiece without damaging the wheel.There is no risk of sharp workpiece edges removing the crown.

Advantages

  • The metal bushing with DEEP CUT PROTECTION prevents bore breakout
  • Maximum insertion depths into the workpiece and contact with sharp workpiece edges possible without damaging the wheel
  • DEEP CUT PROTECTION is a further step towards operator safety
  • High level of comfort thanks to easy-cutting specification

PREMIUM*** cut-off wheels

for nonferrous metals and stone


Description

This PREMIUM*** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on tiles, ceramics, clinker and nonferrous metals, the wheel impresses by achieving clean cutting edges and excellent cutting quality. Machine wear is significantly reduced by low wheel thicknesses.The advantages are topped off by its environmentally-friendly operation, thanks to the reduction in cutting waste.

Advantages

  • Perfect surface finish without any edge chipping
  • Reduced cutting waste and cutting dust generation thanks to small wheel thickness
  • Low load

PREMIUM*** CERABOND cut-off wheels

for steel and stainless steel


Description

The CERABOND bond system developed by TYROLIT combines an easy cutting ceramic grain with a unique bond structure. This prevents premature break-out of the grain and increases the abrasiveness many times over. The CERABOND cut-off wheel range is particularly suitable for optimum machining of extremely hard, sophisticated workpieces and solid materials. The range stands for a long lifetime and shorter working processes with maximum economic efficiency.Through the introduction of the 1.0 mm cut-off wheel with CERABOND system, the product family has been extended by a powerful member. The CERABOND product line has thus been completed and is now available in the specialist retail worldwide

Advantages

  • Shorter working processes
  • Improved productivity
  • Lower production costs

PREMIUM*** LONGLIFE cut-off wheels

for steel


Description

In standard widths, this high-performance tool not only offers a cost-efficient solution, but also the highest safety standards. This is provided by the longest lifetime and stability of the PREMIUM*** LONGLIFE. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of LONGLIFE cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

Advantages

  • Maximum lifetime thanks to LONGLIFE technology
  • Extremely short working times thanks to excellent cutting ability and a low thermal load on the workpiece (heat build-up)
  • No reworking, such as cleaning or deburring, required

PREMIUM*** 2-in-1 cut-off wheels

for steel and stainless steel


Description

This high-performance tool has been designed to be used on both steel and stainless steel and its standard widths offer a cost-efficient solution. This is provided by the longest lifetime and stability of the PREMIUM*** 2in1. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of 2in1 PREMIUM*** cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

Advantages

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for the best results even on stainless steel
  • Extremely short working times thanks to excellent cutting ability and a low thermal load on the workpiece (heat build-up)
  • High level of comfort thanks to easy-cutting specification

PREMIUM*** cut-off wheels

for stainless steel


Description

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of these cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

Advantages

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for the best results on stainless steel
  • Extremely short working times thanks to excellent cutting ability and a low thermal load on the workpiece (heat build-up)
  • Specially for rust-resistant and acid-resistant steels

PREMIUM*** cut-off wheels

for nonferrous metals


Description

In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to achieve short cutting times with NF metals too.New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion.

Advantages

  • New specifications prevent clogging and dulling of the wheel
  • Specification and manufacturing method enable the shortest cutting times
  • Enhanced performance

PREMIUM*** FOCUR Extra cut-off wheels

for cast iron


Description

The PREMIUM*** FOCUR Extra cut-off wheel offers maximum abrasiveness coupled with the best cutting ability. Innovative production technology combined with high-quality zirconium aluminium oxide makes this possible. The assortment of these cut-off wheels ranges from 2.5 to 3.5 mm.This high-performance tool has been developed for use on all cast materials.

Advantages

  • Maximum abrasiveness coupled with the best wheel life thanks to innovative manufacturing technology
  • New bond system combined with high-quality zirconium aluminium oxide for maximum stock removal
  • Universal use

PREMIUM*** CUT AND GRIND

for steel and stainless steel


Description

With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. TYROLIT has now refined this technology. The wheels now have a thinner width of 2.0 mm and offer additional safety for the user with the new DEEP Cut Protection.The risk of sharp workpiece edges removing the crown from the wheel and the consequent break out of the bore is prevented.

Advantages

  • Thanks to CUT AND GRIND, applications such as grinding, deburring and shaping as well as cutting and plunging are possible with only one tool
  • Thinner width of 2.0 mm with DEEP CUT PROTECTION offers additional safety for the operator and prevents bore breakout in the event of contact with sharp-edged workpieces
  • Optimal cutting

PREMIUM*** CUT AND GRIND

2in1 for steel and stainless steel


Description

With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. The design of the wheel guarantees the highest performance right from the start without compromising on safety.While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards.

Advantages

  • Efficient work
  • Universal application options
  • Reduced working times

STANDARD** cut-off wheels

for steel


Description

This tool not only offers a cost-efficient solution for your everyday work, but also the safety standards customers have come to expect from Tyrolit. This is provided by the excellent lifetime and stability of the STANDARD** cut-off wheel. The tool is particularly suitable for cutting solid material.The assortment of STANDARD** cut-off wheels for steel ranges from 2.5 to 3.0 mm. It offers a long lifetime and is suitable for universal use.

Advantages

  • Convenient cutting with excellent lifetime
  • Short working times thanks to very good cutting ability and a low thermal load on the workpiece (heat build-up)
  • No reworking, such as cleaning or deburring, required

STANDARD** cut-off wheels

for stainless steel


Description

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of these cut-off wheels ranges from thicknesses of 1.0 to 1.9 mm for fast, convenient and low-burr cutting. The stable cut-off wheels in thicknesses between 2.0 and 2.5 mm have a very long lifetime and are suitable for universal use.

Advantages

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for very good results on stainless steel
  • Convenient cutting with excellent lifetime
  • Short working times thanks to very good cutting ability and a low thermal load on the workpiece (heat build-up)

STANDARD** cut-off wheels

for stone


Description

This STANDARD** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on stone materials, the wheel impresses by achieving clean cutting edges and good cutting quality.Reworking is no longer required.

Advantages

  • Clean cutting edges and very good cutting quality
  • Fast and convenient work with minimal exertion
  • Silicon carbide ensures very good lifetime and stability when cutting stone and concrete

BASIC* CUT AND GRIND

for steel and stainless steel


Description

The BASIC* CUT AND GRIND makes it possible to perform applications, such as grinding, deburring and shaping as well as cutting and plunging, with only one tool. The design of the wheel guarantees good performance right from the start without compromising on safety.While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards

Advantages

  • Thanks to CUT AND GRIND, applications such as grinding, deburring and shaping as well as cutting and plunging are possible with only one tool
  • The product offers good performance with the highest safety standards
  • Reduced working times

More from Cutting