Отрезни дискове за ъглошлайф

The super-thin PREMIUM*** cut-off wheel has been specially designed for battery-powered angle grinders and enables smaller repairs to be carried out without requiring a power source. This therefore makes it considerably easier to use on scaffolding, in difficult-to-reach terrain or workplaces.These products have been optimised for battery-powered angle grinders and are ideal for cutting thin-walled metal sheets, profiles and pipes. They also make light work of machining small cross-sections, rods and reinforced steel.

Using newly developed technology and new materials we have succeeded in taking another step towards improved user safety. The PREMIUM*** cut-off wheel with DEEP Cut Protection enables the user to achieve maximum insertion depths into the workpiece without damaging the wheel.There is no risk of sharp workpiece edges removing the crown.

This PREMIUM*** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on tiles, ceramics, clinker and nonferrous metals, the wheel impresses by achieving clean cutting edges and excellent cutting quality. Machine wear is significantly reduced by low wheel thicknesses.The advantages are topped off by its environmentally-friendly operation, thanks to the reduction in cutting waste.

The CERABOND bond system developed by TYROLIT combines an easy cutting ceramic grain with a unique bond structure. This prevents premature break-out of the grain and increases the abrasiveness many times over. The CERABOND cut-off wheel range is particularly suitable for optimum machining of extremely hard, sophisticated workpieces and solid materials. The range stands for a long lifetime and shorter working processes with maximum economic efficiency.Through the introduction of the 1.0 mm cut-off wheel with CERABOND system, the product family has been extended by a powerful member. The CERABOND product line has thus been completed and is now available in the specialist retail worldwide

In standard widths, this high-performance tool not only offers a cost-efficient solution, but also the highest safety standards. This is provided by the longest lifetime and stability of the PREMIUM*** LONGLIFE. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of LONGLIFE cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

This high-performance tool has been designed to be used on both steel and stainless steel and its standard widths offer a cost-efficient solution. This is provided by the longest lifetime and stability of the PREMIUM*** 2in1. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of 2in1 PREMIUM*** cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of these cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to achieve short cutting times with NF metals too.New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion.

The PREMIUM*** FOCUR Extra cut-off wheel offers maximum abrasiveness coupled with the best cutting ability. Innovative production technology combined with high-quality zirconium aluminium oxide makes this possible. The assortment of these cut-off wheels ranges from 2.5 to 3.5 mm.This high-performance tool has been developed for use on all cast materials.

With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. TYROLIT has now refined this technology. The wheels now have a thinner width of 2.0 mm and offer additional safety for the user with the new DEEP Cut Protection.The risk of sharp workpiece edges removing the crown from the wheel and the consequent break out of the bore is prevented.

With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. The design of the wheel guarantees the highest performance right from the start without compromising on safety.While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards.

Този инструмент предлага не само икономично решение за ежедневната ви дейност, но и обичайния за TYROLIT висок стандарт на безопасност. Това се дължи на много добрата дълготрайност и стабилност на отрезния диск STANDARD**. Инструментът е подходящ преди всичко за рязане на монолитен материал. Асортиментът от отрезни дискове STANDARD** за стомана се простира в диапазона от 2,5 до 3,0 мм. Те предлагат дълъг живот и универсално приложение.

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of these cut-off wheels ranges from thicknesses of 1.0 to 1.9 mm for fast, convenient and low-burr cutting. The stable cut-off wheels in thicknesses between 2.0 and 2.5 mm have a very long lifetime and are suitable for universal use.

This STANDARD** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on stone materials, the wheel impresses by achieving clean cutting edges and good cutting quality.Reworking is no longer required.

The BASIC* CUT AND GRIND makes it possible to perform applications, such as grinding, deburring and shaping as well as cutting and plunging, with only one tool. The design of the wheel guarantees good performance right from the start without compromising on safety.While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards